欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
微信扫一扫
服务热线:

服务热线:

13165401858

您现在所在的位置: 首页 > 新闻动态 > 常见问题

HARDOX600耐磨钢板在使用是需要注意事项

所属分类:常见问题 发布时间:2020-11-30 13:31:55 来源:http://www.lcnmb500.com 浏览量:

HARDOX600是世界上坚硬的耐磨钢板,硬度值达是600HBW。它一般应用于磨损极其严重的场合,并且主要用来替代铸钢、铬合金铸铁以及表面硬化金属。尽管它的硬度很高,我们还是能够对它进行机加工、焊接和切割。尽管焊达 600的硬度非常高,但它仍具有相当高的冲击韧性。

Hardox600 is a hard wear-resistant steel plate in the world with a hardness value of 600hbw. It is generally used in severe wear cases, and mainly used to replace cast steel, chromium alloy cast iron and surface hardening metal. Despite its high hardness, we can machine, weld and cut it. Although the hardness of welding up to 600 is very high, it still has quite high impact toughness.

现在市面上有很多的地方对于耐磨板的需求量是非常大的,大家在使用的时候一定要注意到一些问题,只有这样才可以让耐磨板长时间的使用下去.

Now there are many places on the market for wear-resistant plate demand is very large, we must pay attention to some problems when using, only in this way can wear-resistant plate be used for a long time

HARDOX600耐磨钢板在使用是需要注意事项(图1)

下面聊城福瑞英物资为大家介绍一下耐磨板使用的注意事项:

The following Liaocheng furuiying materials for you to introduce the use of wear-resistant plate precautions:

在安装的时候一定要注意掉一些方法,千万不可以胡乱安装,不然对于它的伤害是非常大的,安装的时候应该讲究一套流程,正确的流程进行安装才可以让它的使用寿命延长下去。

When installing, we must pay attention to some methods. We must not install it randomly, otherwise it will cause great harm to it. When installing, we should pay attention to a set of process, and the correct process can prolong its service life.

我们在使用的时候如果发现上面有脏污的话,大家应该立刻进行清理,清洁完成之后才可以避免表面受到伤害.建议大家定期的对耐磨板进行擦拭,擦拭干净之后在它的表面进行打蜡处理,主要就是用来进行防腐的,增强它的耐磨性,可以让它使用的更加的长久一点。

If we find dirt on it when we use it, we should immediately clean it. After cleaning, we can avoid surface damage. It is suggested that we regularly wipe the wear-resistant plate, and wax the surface after wiping. It is mainly used for anti-corrosion, enhancing its wear resistance, so that it can be used for a longer time.