欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
微信扫一扫
服务热线:

服务热线:

13165401858

您现在所在的位置: 首页 > 新闻动态 > 行业资讯

耐磨刚600板材料的特点有哪些?

所属分类:行业资讯 发布时间:2020-11-24 13:27:00 来源:http://www.lcnmb500.com 浏览量:

常见Hardox600耐磨刚板材料有以下的性能特点。

The common hardox600 wear-resistant rigid plate material has the following performance characteristics.

1.弹性模量大,即刚性好,是各种材料中*高的。钢板材料在断裂前无塑性变形,是脆性材料,冲击韧性很低。如果设法减少材料内部的缺陷,钢板材料的强度和韧性会大大改善。

  1. Large elastic modulus, that is, good rigidity, is the highest among all kinds of materials. The steel plate has no plastic deformation before fracture and is a brittle material with low impact toughness. If we try to reduce the internal defects of the material, the strength and toughness of the steel plate will be greatly improved.

2.抗压强度比抗拉强度高得多,抗拉强度与抗压强度之比钢板为1:10(铸铁仅为1:3)。此外,耐磨板硬度高,一般在莫氏硬度7以上。

2. Compressive strength is much higher than tensile strength. The ratio of tensile strength to compressive strength is 1:10 for steel plate (only 1:3 for cast iron). In addition, the hardness of wear-resistant plate is high, which is generally higher than Mohs hardness 7.

Hardox600耐磨刚板材料的特点有哪些?(图1)

3.熔点高,高温强度高,线膨胀系数很小,是很有前途的高温材料。用陶瓷材料制造的发动机体积小,热效率大大提高,很有发展前景。

3. High melting point, high strength at high temperature and low coefficient of linear expansion are promising high temperature materials. The engine made of ceramic material has small volume and high thermal efficiency.

4.耐磨板的化学稳定性好。钢板材料在高温下不氧化,抗熔融金属的浸蚀性高,可用来制作柑竭,对酸、碱、盐大都具有良好耐蚀性。

4. The chemical stability of wear-resistant plate is good. The steel plate is not oxidized at high temperature and has high corrosion resistance to molten metal. It can be used to make dried orange and has good corrosion resistance to acid, alkali and salt.

5.优良的理化性能和功能性质。大部分钢板可作半导体材料,还可以作压电材料、热电材料和磁性材料等。利用某些钢板的光学特性,可作激光材料、光色材料、光学纤维等。

5. Excellent physical and chemical properties and functional properties. Most steel plates can be used as semiconductors, piezoelectric materials, thermoelectric materials and magnetic materials. The optical properties of some steel plates can be used as laser materials, photochromic materials and optical fibers.

Hardox600耐磨钢板材料的主要缺点是:脆性大,可靠性能好,加工容易,进行常规(如切削等)加工。

The main disadvantages of hardox600 wear-resistant steel plate material are: brittleness, reliability, good performance, easy processing, conventional (such as cutting) processing.