所属分类：行业资讯 发布时间：2020-10-29 14:28:47 来源：http://www.lcnmb500.com 浏览量：
HARDOX wear-resistant plates are divided into Hardox400, hardox450, hardox500, hardox550 and hardox600. This means that you can always find a hardox450 wear plate that meets your specific needs.
Hardox400 wear plate and hardox450 wear plate are multi-purpose wear plate. Because of its high toughness, good bending and welding properties, it can also be used as load-bearing in some applications.
Hardox500 is a kind of bending and welding wear-resistant plate, which can be used in the field with higher requirements for wear resistance.
Hardox550 is a kind of wear-resistant steel plate with average hardness of 550hbw. Its toughness is the same as hardox500. It is used in high wear occasions. It is mainly aimed at users and manufacturers using high manganese steel castings or wear-resistant steel plates with Brinell hardness of 500. When the HARDOX HARDOX 500 steel plate is upgraded to this product, the Brinell hardness is increased by 50 units, and the wear resistance life is prolonged without losing the toughness of the steel plate.
HARDOX HARDOX 600 is a hard wear-resistant steel plate in the world with a hardness value of 600hbw. It is generally used in severe wear cases, and mainly used to replace cast steel, chromium alloy cast iron and surface hardening metal. Despite its high hardness, we can machine, weld and cut it. Although HARDOX has a very high hardness of 600, it still has a high impact toughness.
1. HARDOX HARDOX 450 is a wear-resistant steel plate with a Brinell hardness of 450hb. It has good cold bending property and is mainly used in wear resistant conditions. HARDOX 450 has very good weldability.
2. HARDOX 450 is used in dump truck carriage, container, crusher, sieve plate, feeder, feeding hopper, elevator, blade, conveyor, bucket, cutter plate, gear, sprocket, etc
4. Hardox450 HARDOX wear resistant steel hardness: hbw425-475.
5. The mechanical properties of hardox450 HARDOX wear-resistant steel are re = 1200Mpa. Tensile strength RM = 1400MPa. Elongation A5 = 10% (typical for 20 mm thick steel plate).
6. Hardox450 HARDOX wear resistant steel delivery status: quenched.
7.Impact toughness of hardox450 HARDOX wear resistant steel: test temperature: - 40 (- 40F) ℃. Charpy-V longitudinal = 45j (typical value of 20 mm thick steel plate).
8.hardox450耐磨钢执行标准：EN 10 204 - 3.1。
8. Hardox450 HARDOX wear resistant steel executive standard: en 10204 - 3.1.
9. Product application: due to its high hardness, high strength and high toughness, HARDOX hardplate is obviously the ideal choice for those occasions with severe wear. The high wear resistance of steel plate extends the service life of dump truck body, excavator bucket, crusher and similar equipment.
The hardness of steel plate is obtained by effective quenching process on our water quenching line. This method can not only obtain higher hardness, but also keep lower alloy composition in steel. The wear plate produced is easy to machine, bend and weld. Application: dump truck body, vibrating screen, feeding hopper, bucket, cutter board, bucket, scraper conveyor, gear, etc.