欢迎来到聊城福瑞营物资有限公司网站!
公司简介 联系我们
微信扫一扫
微信扫一扫
服务热线:

服务热线:

13165401858

您现在所在的位置: 首页 > 新闻动态 > 公司动态

HARDOX耐磨板的运营流程有哪些?

所属分类:公司动态 发布时间:2021-02-22 13:36:56 来源:http://www.lcnmb500.com 浏览量:

有助于增强强度。和锰样,硅在钢的生产过程中用于保持钢材的强度。过冷奥氏体连续冷却转变曲线在实际生产中,过冷奥氏体大多是在连续冷却时转变的,这就需要测定和利用过冷奥氏体连续转变曲线。要求调质件大多承受多种工作载荷,即具有高的强度和良好的塑性,韧性。合金调质钢还要求有很好的淬透性。但不同零件受力情况不同

Helps to increase strength. Like manganese, silicon is used to maintain the strength of steel during the production of steel. Continuous cooling transformation curve of undercooled austenite in practical production, most of undercooled austenite transforms during continuous cooling, so it is necessary to measure and use the continuous cooling transformation curve of undercooled austenite. Most of the quenched and tempered parts are required to bear a variety of working loads, that is, they have high strength and good plasticity and toughness. Good hardenability is also required for alloy quenched and tempered steel. But the stress of different parts is different

一,HARDOX450耐磨板受力情况比较复杂要求高的综合机械性能。

1、 Hardox450 wear-resistant plate has complex stress conditions and requires high comprehensive mechanical properties.

HARDOX耐磨板的运营流程有哪些?(图1)

二,HARDOX耐磨板举行与召开对淬透性的要求不样成分特点中碳量

2、 HARDOX wear-resistant plate for holding and holding the hardenability of different composition characteristics of carbon content

三,提高钢的强度。如调质处理后的Cr钢的性能比钢的性能高很多;加入防止第类回火脆性的元素:含Ni,Cr,Mn的合金调质钢。

3、 Improve the strength of steel. For example, the properties of Cr steel after quenching and tempering treatment are much higher than those of steel; the elements to prevent the second kind of temper brittleness are added: alloy quenched and tempered steel containing Ni, Cr and Mn.

四,高温回火慢冷时易产生第类回火脆性。在钢中加入Mo,W可以防止第类回火脆性。

4、 The second kind of temper brittleness is easy to occur when tempering at high temperature and slow cooling. The addition of Mo and W can prevent the second kind of temper embrittlement.

五,使零件心部有足够的塑性和韧性。T株洲过冷奧氏体等温转变曲线过冷奧氏体等温转变曲线又叫C曲线。

5、 Make the core of parts have enough plasticity and toughness. The isothermal transformation curve of undercooled austenite in Zhuzhou is also called C curve.

六,称为奥氏体化。()钢hardox耐磨板廠的冬天将在之后来临铁行业固定资产投资增幅明显回落。年-月。

6、 It is called austenitizing. () the winter of HARDOX wear-resistant plate plant will come later, and the growth rate of fixed assets investment in iron industry will drop obviously. Year month.

七,450耐磨板同比增长。

7、 450 wear resistant plate increased year on year.

八,并选择接缝中部设置止水条或止水带的组合做法。v在被污染的空气,中(如含有大量硫化物,氧化碳和氮氧化物的大气)。

8、 The combination method of setting water stop strip or water stop belt in the middle of joint is selected. V in polluted air (e.g. atmosphere with large amount of sulfide, carbon oxide and nitrogen oxide).

十,冷凝水会形成醋酸液点。

10、 Condensate will form acetic acid point.